Directions for theTalking Table Clock From Future Aids, The Braille Superstore.
Begin by inserting two AA batteries into the compartment on the bottom of your new clock.
Now, place the clock on a table in front of you, with the screen facing you, and the raised speaker facing away from you.
The raised Talk button is a long, thin bar located on the top of the clock, close to the screen.
Below the screen on the front of the clock, you will find a sliding volume switch and three more buttons. The two smaller buttons are Hour and Minute, and the larger button on the right is Mode.
Press Mode once to enter the time-style setting. A single beep is heard. Press Minute to select 24-hour time, or Hour for 12-hour announcement.
Press Mode until Time Set is heard. Press the Minute and Hour buttons to set the time.
Press the Mode button again, and Alarm Set will be heard. You may now repeat the above procedure to set the alarm.
Now, press Mode a final time. You will hear four beeps, indicating the clock is in normal mode.
Press Talk to hear the time.
Press Minute to turn Hourly report on and off. Five beeps will be heard when this feature is on, and a single beep when it is off.
Press Hour to turn the alarm on and off. The clock will either say Alarm On, Snooze On, or Alarm Off.
The left position of the volume switch is low volume, and the right is high volume.
Happy time-telling!
Blind in Mind: The Braille Superstore
(A Division of MarvelSoft Enterprises, Inc.)
88 Captain Morgans Blvd.
Nanaimo, BC, V9R 6R1
Canada